柚子快報邀請碼778899分享：oracle 大頁配置詳細介紹
柚子快報邀請碼778899分享：oracle 大頁配置詳細介紹
大頁的作用：
防止oracle使用的內存交換，所以設置的大小與oracle配置的sga、pga相關。 只有assm（Automatic Shared Memory Management）模式可以使用大頁，需要關閉amm（Memory Manager Process）
流程：
調整數據庫sga/pga大?。?alter system set sga_max_size=G scope=spfile sid=‘‘; alter system set sga_target=G scope=spfile sid=’’; Alter system set pga_aggregate_target=xxxx scope=spfile sid=‘*’;
關閉AMM管理： 先設0 alter system set memory_target=0 scope=spfile sid=‘‘; alter system set memory_max_target=0 scope=spfile sid=’’; 再置空參數 alter system reset memory_target scope=spfile sid=‘‘; alter system reset memory_max_target scope=spfile sid=’’;
重啟數據庫生效： SQL> SHUTDOWN IMMEDIATE; SQL> STARTUP;
必須assm管理才可以配置大頁
1.查看大頁使用情況 # grep Huge /proc/meminfo
HugePages_Total: 306 （總共306頁） HugePages_Free: 306 （空閑306頁，已使用306-306=0頁） HugePages_Rsvd: 0 （操作系統承諾給oracle預留的頁數） HugePages_Surp: 0 Hugepagesize: 2048 kB （每頁2M，固定值） 大頁總大小=HugePages_Total*Hugepagesize
2.腳本計算大頁數量 運行MOS 401749.1提供的hugepages_settings.sh
LINUX6
#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
# on Oracle Linux
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
#
# This script is provided by Doc ID 401749.1 from My Oracle Support
# http://support.oracle.com
# Welcome text
echo "
This script is provided by Doc ID 401749.1 from My Oracle Support
(http://support.oracle.com) where it is intended to compute values for
the recommended HugePages/HugeTLB configuration for the current shared
memory segments on Oracle Linux. Before proceeding with the execution please note following:
* For ASM instance, it needs to configure ASMM instead of AMM.
* The 'pga_aggregate_target' is outside the SGA and
you should accommodate this while calculating SGA size.
* In case you changes the DB SGA size,
as the new SGA will not fit in the previous HugePages configuration,
it had better disable the whole HugePages,
start the DB with new SGA size and run the script again.
And make sure that:
* Oracle Database instance(s) are up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not setup
(See Doc ID 749851.1)
* The shared memory segments can be listed by command:
# ipcs -m
Press Enter to proceed..."
read
# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`
# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`
if [ -z "$HPG_SZ" ];then
echo "The hugepages may not be supported in the system where the script is being executed."
exit 1
fi
# Initialize the counter
NUM_PG=0
# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | cut -c44-300 | awk '{print $1}' | grep "[0-9][0-9]*"`
do
MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
if [ $MIN_PG -gt 0 ]; then
NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
fi
done
RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`
# An SGA less than 100MB does not make sense
# Bail out if that is the case
if [ $RES_BYTES -lt 100000000 ]; then
echo "***********"
echo "** ERROR **"
echo "***********"
echo "Sorry! There are not enough total of shared memory segments allocated for
HugePages configuration. HugePages can only be used for shared memory segments
that you can list by command:
# ipcs -m
of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not configured"
exit 1
fi
# Finish with results
case $KERN in
'2.2') echo "Kernel version $KERN is not supported. Exiting." ;;
'2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
'2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.8') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.10') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'4.1') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
esac
# End
/etc/sysctl.conf下 vm.nr_hugepages值
調整過sga后需要重新計算，如果新加了一個實例也要重新計算
例子： vi /etc/sysctl.conf vm.nr_hugepages=1496
執行sysctl -p 命令使以上設置生效
LINUX7 metalink(文檔 ID 401749.1)
#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
# on Oracle Linux
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
#
# This script is provided by Doc ID 401749.1 from My Oracle Support
# http://support.oracle.com
# Welcome text
echo "
This script is provided by Doc ID 401749.1 from My Oracle Support
(http://support.oracle.com) where it is intended to compute values for
the recommended HugePages/HugeTLB configuration for the current shared
memory segments on Oracle Linux. Before proceeding with the execution please note following:
* For ASM instance, it needs to configure ASMM instead of AMM.
* The 'pga_aggregate_target' is outside the SGA and
you should accommodate this while calculating the overall size.
* In case you changes the DB SGA size,
as the new SGA will not fit in the previous HugePages configuration,
it had better disable the whole HugePages,
start the DB with new SGA size and run the script again.
And make sure that:
* Oracle Database instance(s) are up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not setup
(See Doc ID 749851.1)
* The shared memory segments can be listed by command:
# ipcs -m
Press Enter to proceed..."
read
# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`
# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`
if [ -z "$HPG_SZ" ];then
echo "The hugepages may not be supported in the system where the script is being executed."
exit 1
fi
# Initialize the counter
NUM_PG=0
# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | cut -c44-300 | awk '{print $1}' | grep "[0-9][0-9]*"`
do
MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
if [ $MIN_PG -gt 0 ]; then
NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
fi
done
RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`
# An SGA less than 100MB does not make sense
# Bail out if that is the case
if [ $RES_BYTES -lt 100000000 ]; then
echo "***********"
echo "** ERROR **"
echo "***********"
echo "Sorry! There are not enough total of shared memory segments allocated for
HugePages configuration. HugePages can only be used for shared memory segments
that you can list by command:
# ipcs -m
of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not configured"
exit 1
fi
# Finish with results
case $KERN in
'2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
'2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.8') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.10') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'4.1') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'4.14') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'5.4') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
*) echo "Kernel version $KERN is not supported by this script (yet). Exiting." ;;
esac
# End
3.設置內存鎖 memlock值應該為：大頁數適當增加一些* Hugepagesize。 查詢Hugepagesize值：grep Huge /proc/meminfo |grep Hugepagesize (1496+5)* 2048= 3074048
# vi /etc/security/limits.conf oracle soft memlock 3074048 oracle hard memlock 3074048
數量大于腳本算出的值一些，比如算出 700寫800 vi /etc/security/limits.conf
oracle soft memlock xxx oracle hard memlock xxx
4.重啟庫，再次查看 SQL> shutdown immediate SQL> startup
最好是重啟服務器！
5.再次查看 grep Huge /proc/meminfo
柚子快報邀請碼778899分享：oracle 大頁配置詳細介紹
精彩文章
本文內容根據網絡資料整理，出于傳遞更多信息之目的，不代表金鑰匙跨境贊同其觀點和立場。
轉載請注明，如有侵權，聯系刪除。
Zando時尚出海者
